COVE BITS
| Part No. | Cut Diameter | Radius | Cut Length | Shank | Overall Length |
|---|---|---|---|---|---|
| 0804-CO | 7/8" | 1/4" | 9/16" | 1/4" | 2" |
| 0604-CO | 1.1/8" | 3/8" | 9/16" | 1/4" | 2" |
| 1604-CO | 1.3/8" | 1/2" | 3/4" | 1/4" | 2.1/4" |
]]>
V POINT METRIC BORING BITS
Left Hand Rotation = Orange
Right Hand Rotation = Black
| Part# | Overall Length | Rotation | Cut Diameter | Shank |
|---|---|---|---|---|
| 7005-LHV | 70mm | Left | 5mm | 10mm |
| 7005-RHV | 70mm | Right | 5mm | 10mm |
| 7008-LHV | 70mm | Left | 8mm | 10mm |
| 7008-RHV | 70mm | Right | 8mm | 10mm |
BALL BEARINGS
| Part# | Outside Dia | Inside Dia |
|---|---|---|
| BA3818 | 3/8" | 1/8" |
| BA38316 | 3/8" | 3/16" |
| BA1236 | 1/2" | 3/16" |
| BA1214 | 1/2" | 1/4" |
| BA3414 | 3/4" | 1/4" |
| BA3412 | 3/4” | 1/2” |
V GROOVE 90 DEGREES
| Part# | Cut Diameter | Cut Length | Shank | Overall Length |
|---|---|---|---|---|
| 0804-VG | 1/2" | 1/2" | 1/4" | 1.3/4" |
| 1208-VG | 3/4" | 5/8" | 1/2" | 2.1/8" |
MULTI TRIMMER WITH DOWN SHEAR – TOP & BOTTOM BEARING
| Part# | Cut Diameter | Cut Length | Shank | Overall Length |
|---|---|---|---|---|
| 1208-MT | 3/4" | 2" | 1/2" | 4.5/16" |
BEVEL TRIM – 2 FLUTE – 15 DEGREE
| Part# | Cut Diameter | Cut Length | Shank | Overall Length |
|---|---|---|---|---|
| 1314-BT | 5/8" | 1/4" | 1/4" | 2” |
| 1238-BT | 1/2" | 3/8" | 1/4" | 1.3/4" |
3 WING SLOTTING CUTTERS – REPLACEMENT CUTTER ONLY
| Part# | Cut Diameter | Cut Width | Bore | No. Of Wings |
|---|---|---|---|---|
| 1254-C | 1.7/8" | 1/16" | 5/16" | 3 Wings |
| 0154-C | 1.7/8" | 3/32" | 5/16" | 3 Wings |
| 0204-C | 1.7/8" | 1/8" | 5/16" | 3 Wings |
| 0254-C | 1.7/8" | 5/32" | 5/16" | 3 Wings |
| 0304-C | 1.7/8" | 3/16" | 5/16" | 3 Wings |
| 0404-C | 1.7/8" | 1/4" | 5/16" | 3 Wings |
3 WING SLOTTING CUTTERS – FULL ASSEMBLY – ARBOR, BEARING, CUTTER
| Part# | Cut Diameter | Cut Width | Shank | No. of Wings |
|---|---|---|---|---|
| 1254-SC | 1.7/8" | 1/16" | 1/4" | 3 Wings |
| 0154-SC | 1.7/8" | 3/32" | 1/4" | 3 Wings |
| 0204-SC | 1.7/8" | 1/8" | 1/4" | 3 Wings |
| 0254-SC | 1.7/8" | 5/32" | 1/4" | 3 Wings |
| 0304-SC | 1.7/8" | 3/16" | 1/4" | 3 Wings |
| 0404-SC | 1.7/8" | 1/4" | 1/4" | 3 Wings |
FLUSH TRIM TEMPLATE
| Part# | Cut Diamter | Cut Length | Shank | Overall Diameter |
|---|---|---|---|---|
| 0408-FTT | 1/2" | 1/2" | 1/4" | 2" |
| 0404-FTT | 1/2" | 1/4" | 1/4" | 1.5/8" |
| 0406-FTT | 1/2" | 1" | 1/4" | 2.1/2" |
| 1208-FTT | 3/4" | 1.3/1.6" | 1/2" | 2.1/2" |
| 0806-FTT | 3/4" | 2" | 1/2" | 4" |
FLUSH TRIM WITH DOUBLE BALL BEARING GUIDE-2 FLUTE
| Part# | Cut Diameter | Cut Length | Shank | Overall Length |
|---|---|---|---|---|
| 0404FT-DB | 1/4" | 3/4" | 1/4" | 2.1/4" |